Call Customer Services on: +757.995.7267

Welcome to Clean Cut Graphics!

Red/black Buffalo Plaid

Red/black Buffalo Plaid

In stock

A088 Red/black Buffalo Plaid

* Required Fields


Our New Printed Vinyl Patterns

These patterns are printed per order on either an Oracal 651 or Orajet adhesive vinyl.  We are also able to print on heat transfer vinyl with Siser material, as we are an authorized SIser Reseller.

We do offer printed vinyl in 5 ft rolls as well.  Most of these will be a continuous pattern but some may literally be 12x12 design, one on top of the other and not a seamless pattern.  We are adding designs daily, so please contact us before ordering if you want to know about a certain design being seamless or not when ordering the 5 ft rolls.


Our adhesive vinyl is used just like regular 651, adhesive, sticky back vinyl.  It is permanent vinyl with a life of 4-6 years. The print will last longer, especially in an outdoor environment with a laminate applied.  We do sell Oraguard as our laminate to help protect the prints from the weather. Indoors no laminate is needed. Click here to order some Oraguard Laminate.


The Heat Transfer Vinyl is made by Siser and is applied similar to adhesive vinyl.  To make it clear we have made videos of exactly how to apply and use this material. EasyMask, literally a carrier sheet and is reusable, is needed to transfer the htv onto your textile.  You can also use a carrier sheet from other siser products (regular easyweed) if it is still tacky and will hold your design. Click here to order EasyMask.


Here are the steps needed to use our printed HTV.

  1. Printed side up towards the cutting blade

  2. Using your cricut or cameo or other cutter/plotter, cut your design.

  3. Weed excess material not meant for your design.

  4. Evenly apply EasyMask over your design and squeegee front and back sides.

  5. Peel rear backing sheet away from design. Now your vinyl design should be only on the EasyMask carrier sheet.

  6. Place design on garment and press at 300 degrees for 15 seconds

  7. Peel EasyMask off when garment is still warm.  Warm means you can stand to touch it with your hand, not burning you but above room temperature.

  8. Wait minimum 24 hours before washing. Do not use liquid softener.  Wash Garments inside out and hang dry.

Additional Information

Manufacturer No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: Red/black Buffalo Plaid

How do you rate this product? *

1 1 star
2 2 star
3 3 star
4 4 star
5 5 star