BlackBoard HTV

Size

Write it, Wipe it, Repeat!

Now you can turn any fabric into a writable surface that can be used over and over again! New BlackBoard™ heat transfer vinyl by Siser®, transforms plain materials into a walking chalkboard – without making you feel like a walking sandwich board! Lightweight and super soft, BlackBoard is unlike any HTV you’ve ever experienced. This revolutionary material only needs 275°F of heat with medium pressure for just 15 seconds to create a machine washable chalkboard! With a low application temperature and warm peel carrier, this HTV is ideal for heat sensitive materials.

Compatible with standard chalk, Blackboard is as easy to re-use as it is to apply. Simply wipe clean with a damp cloth to start again! There are countless ways to advertise, organize, and customize with BlackBoard heat transfer vinyl.

BlackBoard is CPSIA Certified so you can decorate children’s items with peace of mind.

Cricut:

Blade: Standard
Setting: Paper

Silhouette Cameo:

Blade: Standard, 2
Setting: Heat Transfer
Material: Smooth
Speed: 5
Thickness: 8

Brother:

Blade: 2
Cut Speed: 1
Cut Pressure: 1

Roland GX-24:

Blade: 45°
Force: 70g-80g
Offset: .250
Speed: 50 cm/s

*Mirror the design before cutting
*All cut settings listed are representative of conditions that were appropriate at time of evaluation, they should be used as a starting point and may need to be adjusted to due to blade, cutting mat and/or cutting strip conditions.

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold
• Cover completed design and press for 5-10 seconds
Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 275°F/135°C
• Use light/medium pressure for 15 seconds
• Peel carrier warm or cold

Subscribe