Brick™ 600 Heat Transfer Vinyl

Our Thickest Heat Transfer Vinyl – Now Easier to Cut and Apply

Sheets

Thin or thick, materials of all sizes have a place in garment decorating! Siser Brick 600 is a 600 micron thick, flexible heat transfer vinyl that’s designed for smaller logos and designs to add extra dimension to your garments. Brick 600’s semi-gloss finish looks great on caps, bags, and is ideal for left chest logos. Next time you feel your design is just too flat, consider giving it some dimension with Brick 600 by Siser!

Brick is CPSIA Certified, so it’s perfect for decorating children’s clothing and accessories.

Cutter Settings

 Application Instructions

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier cold

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 311°F/155°C
• Use medium/firm pressure for 20 seconds
• Peel carrier cold

Brick 600 Applies to:

• 100% cotton
• Poly/cotton blends
• 100% polyester

Laundering:

• Wait 24 hours before first wash
• Machine wash cold / mild detergent
• Dry on low dryer setting
• Do not dry clean

Sheet is 12" x 20" +/- .5"